February 23, 2026 – Vancouver, British Columbia – Daura Gold Corp. (TSXV:DGC) (the “Company” or “Daura” ) is pleased to announce that, following a detailed review of historical drill core, new high-grade infill sampling results have significantly enhanced the precious metals intercepts at its flagship Antonella Project (“Antonella” or the “Project”), adjacent to Highlander Silver Corp.’s Bonita Project in Ancash, Peru. The previous, private owner of the Project drilled 12 holes at Antonella in 2011 and selectively sampled drill core, leaving significant mineralized intervals unsampled. Systematic infill sampling of the historic core has increased gold equivalent ‡ gram meters * for the Project’s significant intercepts # by 51%, confirming higher-grade continuity in the key vein systems from existing core. Highlights are listed below with corresponding images, drill map and sections in Figures 1-5. Drill intercepts are in Table 1. Mark Sumner, CEO of Daura commented, “The systematic infill sampling of historic drill core has significantly increased the previously reported gold and silver intervals at Antonella, revealing wide intercepts across multiple holes and identifying high grade vein mineralization in 9 of 12 drill holes. This new data underpins the potential of the Antonella project, as well as the quality of Daura’s technical team by recognizing and executing on the opportunity to enhance our drilling dataset”. Stuart Milles, VP of Exploration for Daura, commented, “The upgraded drill intercepts at Antonella provide critical new insights into Antonella’s mineralizing system, including high-value pathfinder geochemical vectors. These data are essential for targeting high-grade extensions and expansion of the Antonella deposit in the Company’s future planned drill program”. Highlights of the Recent Drill Core Infill Sampling Program: 513 infill drill core samples were collected from the historic drill core from Antonella Main zone. CBD11004B - 22.4m at 4.36 g/t Au & 23 g/t Ag from 36.8m, including: 1.50m at 4.85 g/t Au and 11.40 g/t Ag from 40.1m; 1.20m at 8.77 g/t Au and 60.90 g/t Ag from 42.6m; 0.50m at 18.86 g/t Au and 24.50 g/t Ag from 50.2m; 0.65m at 20.52 g/t Au and 45.70 g/t Ag from 51.9m; and 0.80m at 19.25 g/t Au and 241 g/t Ag from 52.55m. CBD11004A - 17.2m at 0.95 g/t Au & 10 g/t Ag (1.11 g/t AuEq. ‡ ) from 30.4m, including; 1.10m at 2.85 g/t Au and 39.8 g/t Ag from 42.3m; and 1.30m at 2.33 g/t Au and 14.4 g/t Ag from 43.4m. CBD11007 - 8.15m at 1.98 g/t Au & 17 g/t Ag (2.24 g/t AuEq. ‡ ) from 127.0m, including; 0.85m at 8.73 g/t Au and 63.70 g/t Ag from 127.0m; and 0.40m at 15.75 g/t Au and 46.90 g/t Ag from 131.2m. CBD11001 - 6.6m at 1.61 g/t Au & 5.13 g/t Ag, from 34.2m, including; 0.20m at 47.20 g/t Au and 102 g/t Ag from 40.6m. CBD11001 - 7.1m at 1.79 g/t Au & 23 g/t Ag (2.16 g/t AuEq. ‡ ) from 100.6m, including; 0.15m at 20.22 g/t Au and 110 g/t Ag from 100.6m; and 0.35m at 24.10 g/t Au and 120 g/t Ag from 104.8m. CBD11006 - 1.0 m at 8.0 g/t Au & 54 g/t Ag (8.9 g/t AuEq. ‡ ) from 58.9m

February 17, 2026 – Vancouver, British Columbia – Daura Gold Corp. (TSXV:DGC) (the “Company” or “Daura” ) is pleased to announce that it has commenced its Phase One diamond drilling program at the Cerro Bayo Gold–Silver Project (“Cerro Bayo” or the “Project”), located in Santa Cruz Province, Argentina. Cerro Bayo is located in Argentina’s premier gold-silver district, the Deseado Massif, which has produced 600+ million ounces of silver and 20+ million ounces of gold since 1990 and hosts major mines like Newmont’s Cerro Negro and Hochschild’s San Jose. See the details of Daura’s option agreement on Cerro Bayo in the Company’s news release dated November 3, 2025 ( Cerro Bayo News Release ). “The commencement of drilling at Cerro Bayo is a key milestone for Daura and marks the first systematic drill test of this highly prospective project,” said Mark Sumner, CEO of Daura Gold. “With 15 well-defined targets supported by geochemistry and IP geophysics, this Phase One program gives us multiple opportunities for discovery and represents an important step in unlocking this project’s potential.” Drill Program Overview The Phase One drilling program will consist of approximately 22 diamond drill holes totaling 1,500 metres, designed to test 15 priority exploration targets generated from the integration of historical geochemical sampling, gradient array Induced Polarization (“IP”) survey and defined by IP Profiling. In the northern target area, three pole-dipole IP profile lines were completed, resulting in the identification of eight drill targets. Initial drilling will focus on three priority targets, which will be tested with ten diamond drill holes totaling approximately 500 metres. In the southern target area, seven priority drill targets have been outlined and will be tested with 14 diamond drill holes totaling approximately 1,000 metres. These targets are associated with Apparent Resistivity features that coincide with the surface geochemical responses and are interpreted as structural controls, consistent with the Project’s low-sulfidation epithermal gold–silver mineralization model. The objective of the program is to confirm the presence, continuity, and orientation of mineralized structures at depth, while advancing multiple target areas toward potential follow-up drilling. The Company will provide updates as drilling progresses and analytical results are received and interpreted.